| Description | PUMA280L | |
| Capacity | Swing over bed mm(inch) | 630 (24.8) |
| Swing over saddle mm(inch) | 500 (19.7) | |
| Recom. turning diameter mm(inch) | 255 (10.0) | |
| Max. turning diameter mm(inch) | 420 (16.5) | |
| Max. turning length mm(inch) | 1078 (42.4) | |
| Bar working diameter mm(inch) | 76 (3.0) | |
| Carriage | Travel distance X-axis mm(inch) | 242 (32+210) 9.5(1.3+8.3) |
| Z-axis mm(inch) | 1100(43.3) | |
| Rapid traverse X-axis mm(inch) | 20 (787.4) | |
| Z-axis mm(inch) | 24 (944.9) | |
| Main Spindle | Spindle speed r/min | 3500 |
| Spindle nose ASA | A2 #8 | |
| Spindle bearing diameter (Front) mm(inch) | 136 (5.4) | |
| Spindle bore diameter mm(inch) | 86 (3.4) | |
| Turret | No. of tool station st | 10 (12) |
| OD tool height mm(inch) | 25 x 25 (1.0 x 1.0) | |
| Boring bar diameter mm(inch) | Ø 50 (Ø2.0) | |
| Indexing time (1st swivel) s | 0.15 | |
| Tail Stock | Quill diameter mm(inch) | 100 (3.9) |
| Quill bore taper MT# | MT#5 | |
| Quill travel mm(inch) | 100 (3.9) | |
| Motors | Main spindle motor (30 min) kW(Hp) | 22 (29.5) |
| Servo motor X-axis kW(Hp) | 3.0 (4.0) | |
| Z-axis kW(Hp) | 4.0 (5.4) | |
| Coolant pump kW(Hp) | 0.4 (0.5) | |
| Power Source | Electric power supply kVA | 36.5 |
| Machine size | Machine height mm(inch) | 1735 (68.3) |
| Machine size L x W mm(inch) | 3838x1670(151.1x65.7) | |
| Machine weight kn(lb) | 5300 (208.7) | |
