| Description | Pynx 220C | |
| Capacity | Swing over bed mm(inch) | 510 (20.1) |
| Swing over saddle mm(inch) | 290 (11.4) | |
| Recom. turning diameter mm(inch) | 210 (8.3) | |
| Max. turning diameter mm(inch) | 320 (12.6) | |
| Max. turning length mm(inch) | 305(525) 12(20.7) | |
| Bar working diameter mm(inch) | 65 (2.6) | |
| Carriage | Travel distance X-axis mm(inch) | 175 (6.9) |
| Z-axis mm(inch) | 330(550) 13(21.7) | |
| Main Spindle | Spindle speed r/min | 4000 |
| Spindle nose ASA | A2 #6 | |
| Spindle bearing diameter (Front) mm(inch) | 110 (4.3) | |
| Spindle bore diameter mm(inch) | 76 (3.0) | |
| Tool Post | No. of tool station st | 12st |
| OD tool height mm(inch) | 25 x25 (1.0 x 1.0) | |
| Boring bar diameter mm(inch) | Ø 40 (Ø1.6) | |
| Indexing time (1st swivel) s | 0.15 | |
| Feedrate | Rapid traverse X/Z-axis m/min(ipm) | 30(1181) 36(1417) |
| Max. cutting feedrate X/Z-axis mm/rev(ipr) | 500/500(19.7/19.7) | |
| Tail Stock | Quill diameter mm(inch) | 65 (2.6) |
| Quill bore taper MT# | MT#4 | |
| Quill travel mm(inch) | 80 (3.1) | |
| Motors | Main spindle motor kW(Hp) | 15/11 (20.1/14.8) |
| Servo motor X-axis kW(Hp) | 1.8 (2.4) | |
| Z-axis kW(Hp) | 1.8 (2.4) | |
| Coolant pump kW(Hp) | 0.4 (0.5) | |
| Power Source | Electric power supply kVA | 43 |
| Machine size | Machine height mm(inch) | 1655(65.2) |
| Machine size L x W mm(inch) | 2325x1600(91.5x63.0) | |
| Machine weight kn(lb) | 2900 (3100) 6393.3 (6834.2) | |
